Unimark ET6000 Guía para resolver problemas descargar pdf (Pagina 43)

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer

2.4.3 Cleaning the Platen

To clean the 8500’s platen, complete the following steps:

2.4.4 Replacing the Platen

To replace the 8500’s platen, complete the following steps:

14 Lower the printer’s cover, plug the AC power cord into a power source, and turn on power to

the printer.

15 Reload paper stock.

Note: It is recommended that the new print head be calibrated at this point. See “Calibrating the

8500’s Print Head” on page 36.

Step Action

1 Power off the unit. Unplug the unit’s AC power cable from the power source.

2 Open the printer’s cover by pressing the cover release button.

3 After the cover pops open, lift the cover to the full upright position.

4 Press the print head release latch downward to open the print head assembly.

5 Clean the platen surface using Bloch Buster, window cleaner, a damp cloth/paper towel, or

Fedron.

6 If the platen appears to be defective, replace the platen.

7 Lower the print head assembly, making sure to securely latch it back into position.

8 Lower the printer’s cover, plug the AC power cord into a power source, and turn on the power

to the printer.

9 Reload the paper stock.

Step Action

1 Power off the unit. Unplug the unit’s AC power cable from the power source.

2 Open the printer’s cover by pressing the cover release button.

3 After the cover pops open, lift the cover to the full upright position.

Step Action (Continued)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Sin comentarios

Unimark ET6000 Guía para resolver problemas Pagina 43